CyberData 011214 Especificações descarregar pdf (Página 80)

Installing the VoIP Outdoor Intercom with Keypad

Intercom Setup

Operations Guide 930809M CyberData Corporation

2. On the Autoprovisioning page, you may enter values for the parameters indicated in Table 2-

23.

Note The question mark icon (

) in the following table shows which web page items will be defined

after the To

ggle Help button is pressed.

Table 2-23. Autoprovisioning Configuration Parameters

Web Page Item Description

Disable Autoprovisioning Prevent the device from automatically trying to download a

configuration file. See Section 2.4.15.1, "Autoprovisioning" for

more information.

Autoprovisioning Server

Enter the IPv4 address of the provisioning server in dotted

decimal notation.

Autoprovisioning Filename

The autoprovisioning filename is the configuration filename.

The default autoprovisioning filename is in the format of

<mac address>.xml.

Supported filename extensions are .txt, and .xml. The current

filename is denoted by an asterisk at the bottom of the

Autoprovisioning Page. Enter up to 256 characters.

A file may have any name with an xml extension. If a file

name is entered, the device will look for the specified file

name, and only that file.

Use tftp

The device will use TFTP (instead of http) to download

autoprovisioning files.

Username

The username used to authenticate with an autoprovisioning

server. Leave this field blank to disable authentication.

Password

The password used to authenticate with an autoprovisioning

server. Leave this field blank to disable authentication.

Autoprovisioning Autoupdate 

(in minutes)

The reoccurring time (in minutes) the device will wait before

checking for new autoprovisioning files. Enter up to 6 digits. A

value of 0 will disable this option.

Note:

To use the auto update options, enable the Set Time

with NTP Server on boot setting on the Device

Configuration Page page (see Table 2-7).

Autoprovision at time (HHMMSS)

The time of day the device will check for a new

autoprovisioning file. The time must be 6 characters in length

and in HHMMSS format. An empty value will disable this

option.

Note:

To use the auto update options, enable the Set Time

with NTP Server on boot setting on the Device

Configuration Page page (see Table 2-7).

Autoprovision when idle

(in minutes > 10)

The idle time (in minutes greater than 10) after which the

device will check for a new autoprovisioning file. Enter up to 6

digits. A value of 0 will disable this option.

Note:

To use the auto update options, enable the Set Time

with NTP Server on boot setting on the Device

Configuration Page page (see Table 2-7).

Click the Save button to save your configuration settings.

Note:

You need to reboot for changes to take effect.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 118 119

Comentários a estes Manuais

Sem comentários

CyberData 011214 Especificações Página 80

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de porteiro eletrónico CyberData 011214