CyberData 011214 Especificações descarregar pdf (Página 35)

Installing the VoIP Outdoor Intercom with Keypad

Intercom Setup

Operations Guide 930809M CyberData Corporation

2. On the Device page, you may enter values for the parameters indicated in Table 2-7.

Note The question mark icon (

) in the following table shows which web page items will be defined

after the To

ggle Help button is pressed.

Table 2-7. Device Configuration Parameters

Web Page Item Description

Volume Settings (0-9)

SIP Volume Set the speaker volume for a SIP call. A value of 0 will mute the

speaker during SIP calls.

Multicast Volume

Set the speaker volume for multicast audio streams. A value of 0 will

mute the speaker during multicasts.

Ring Volume

Set the ring volume for incoming calls. A value of 0 will mute the

speaker instead of playing the ring tone when Auto-Answer Incoming

Calls is disabled.

Sensor Volume

Set the speaker volume for playing sensor activated audio. A value of

0 will mute the speaker during sensor activated audio.

Microphone Gain

Set the microphone gain level.

Volume Boost:

No Volume Boost

Volume Boost 1

Volume Boost 2

Volume Boost 3

Set the Boost level to increase the volume output of the speaker.

Using Volume Boost may introduce audio clips or cause the device to

drop from full duplex to half duplex operation.

Normal operation of the product can be met with volume levels 0

through 9. 0 being mute and 9 being the loudest volume that in a

normal arm's length and average background noise, will enable full

duplex operation and give the best quality of sound output.

The volume boost options increase the output of the speaker by:

3db for Boost level 1

6db for Boost level 2

9db for Boost level 3

If the user would like a higher output from the speaker, the Boost

settings are available. However, operation in Boost Mode may

overdrive or clip the audio if, for example, the phone that is

connected has a high microphone gain or if the person has a loud

voice talking too close to the microphone.

The acoustic echo canceller also has a harder time maintaining full

plex operation when in the Boost Mode. The product may drop

from full duplex operation into half/duplex mode while in Boost

Mode.

Contact CyberData support for additional information if needed.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 118 119

Comentários a estes Manuais

Sem comentários

CyberData 011214 Especificações Página 35

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de porteiro eletrónico CyberData 011214