CyberData 011214 Especificações descarregar pdf (Página 56)

Installing the VoIP Outdoor Intercom with Keypad

Intercom Setup

Operations Guide 930809M CyberData Corporation

2. On the Multicast page, enter values for the parameters indicated in Ta bl e 2-17.

Note The question mark icon (

) in the following table shows which web page items will be defined

after the To

ggle Help button is pressed.

Web Page Item Description

Enable Multicast Operation Enables or disables multicast operation.

Priority Indicates the priority for the multicast group. Priority 9 is th

highest (emergency streams). 0 is the lowest (background

music). SIP calls are considered priority 4.5. See Section

2.4.9.1, "Assigning Priority" for more details.

Address Enter the multicast IP Address for this multicast group (15

character l

imit).

Por t Enter the port number for this multicast group (5 character

limi

t [range can be from 2000 to 65535]).

Note: The multicast ports have to be even values. The

webpage will enforce this restriction.

Name Assign a descriptive name for this multicast group (25

character l

imit).

Beep When selected, the device will play a beep before multicast

dio is sent.

Click the Sa

ve button to save your configuration settings.

Note: Y

ou need to reboot for changes to take effect.

Click on the Re

boot button to reboot the system.

Note You must click on the Save button and then the Reboot button for the changes to take

effect.

2.4.9.1 Assigning Priority

The device will prioritize simultaneous audio streams according to their priority in the list.

If both SIP and Multicast is enabled, SIP audio streams are considered priority 4.5. SIP audio will

interr

upt multicast streams with priority 0 through 4 and will be interrupted by multicast streams with

priority 5 through 9.

During priority 9 m

ulticast streams, the volume is set to maximum.

Note SIP calls

, multicast streams, ring tones, ringback tones, and nightring tones are all

prioritized.

Ringtones and

Nightringtones

Ringtones all play at the same priority level. This means that it is possible to have a nightring tone

and a normal ringtone playing at the same time.

Table 2-17. Multicast Configuration Parameters

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 118 119

Comentários a estes Manuais

Sem comentários

CyberData 011214 Especificações Página 56

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de porteiro eletrónico CyberData 011214