CyberData 011214 Especificações descarregar pdf (Página 52)

Installing the VoIP Outdoor Intercom with Keypad

Intercom Setup

Operations Guide 930809M CyberData Corporation

Remote SIP Port The Remote SIP Port is the port number the device will use as the

destination port when sending SIP messages for the Nightringer

extension. The default Remote SIP Port is 5060. The supported range is

0-65536. Enter up to 5 digits.

Local SIP Port The Local SIP Port is the port number the device will use to receive SIP

messages for the Nightringer extension. This value cannot be the same as

the Local SIP Port for the primary extension. The default Local SIP Port is

5061. The supported range is 0-65536. Enter up to 5 digits.

Outbound Proxy Enter the Outbound Proxy address as an IPv4 address in dotted decimal

notation or a fully qualified domain name (FQDN). When an IP address is

configured, the device will send all SIP messages to this IP address for the

Nightringer extension. When an FQDN is configured, the device will run

DNS NAPTR, SRV, and A queries on the FQDN to resolve an IP address

to which it will send all SIP messages for the Nightringer extension. This

field can accept entries of up to 255 characters in length.

Outbound Proxy Port The Outbound Proxy Port is port number used as the destination port

when sending SIP messages to the outbound proxy for the Nightringer

extension. A value of 0 will default to 5060. The supported range is 0-

65536. Enter up to 5 digits.

User ID Specify the SIP User ID for the SIP server. This parameter becomes the

user portion of the SIP-URI for the device's Nightringer extension. Enter

up to 64 alphanumeric characters.

Authenticate ID Specify the Authenticate ID for the SIP Server. This parameter is required

for SIP registration authentication. Enter up to 64 alphanumeric

characters.

Authenticate Password Specify the Authenticate Password for the SIP Server. This parameter is

required for SIP registration authentication. Enter up to 64 alphanumeric

characters.

Re-registration Interval (in seconds) The SIP Re-registration Interval (in seconds) is the SIP Registration lease

time, also known as the expiry. The supported range is 30-3600 seconds.

Enter up to 4 digits.

RTP Settings

RTP Port (even) Specify the port number used for the RTP stream after establishing a SIP

call. This port number must be an even number and defaults to 10500.

The supported range is 0-65536. Enter up to 5 digits.

Call Disconnection

Terminate Call After Delay Automatically terminate an active call after a given delay in seconds. A

value of 0 will disable this function. Enter up to 8 digits.

Click the Save button to save your configuration settings.

Note: You need to reboot for changes to take effect.

Click on the Reboot button to reboot the system.

Table 2-16. SIP Configuration Parameters (continued)

Web Page Item Description

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 118 119

Comentários a estes Manuais

Sem comentários

CyberData 011214 Especificações Página 52

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de porteiro eletrónico CyberData 011214