CyberData VoIP Ceiling Speaker Manual do Utilizador descarregar pdf (Página 12)

CyberData Corporation 930095H Operations Guide

Installing the VoIP Ceiling Speaker

Speaker Setup

2.2 Speaker Setup

Set up and configure each speaker before you mount it.

CyberData delivers each speaker with the following factory default values:

2.2.1 Connect Power to the Speaker

Figure 2-1 and Figure 2-2 illustrates how to connect the VoIP Ceiling Speaker to a 802.3af compliant

ethernet hub (Figure 2-1) or a PoE Injector (Figure 2-2) via a Cat 5 Ethernet Connector.

Note If a 802.3af compliant ethernet hub is not available, you will need a PoE Injector, part

#010867A (ordered separately). A PoE Injector is a power supply solution for those who

have a standard hub.

Table 2-2. Factory Default Settings—Default of SIP

Parameter Factory Default Setting

SIP/MGROUPS SIP

IP Addressing static

IP Address 192.168.3.10

Web Access Username admin

Web Access Password admin

Subnet Mask 255.255.255.0

Default Gateway 192.168.3.1

Figure 2-1. 802.3af Compliant Ethernet Hub

Figure 2-2. PoE Injector

PoE Injector (Part #010867A)

Non PoE Hub

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Sem comentários

CyberData VoIP Ceiling Speaker Manual do Utilizador Página 12