CyberData 011186 Especificações descarregar pdf (Página 37)

Installing the VoIP V3 Intercom

Configure the SIP Parameters

Operations Guide 930472A CyberData Corporation

2.2.6.2 Point-to-Point Configuration

When the board is set to not register with a SIP server (see Figure 2-14), it's possible to set the

intercom to dial out to a single endpoint.

In this case, the dial-out extension should be the IP address of the remote device. The Intercom can

also receive Point-to-Point calls. The delayed DTMF functionality is available in the Point-to-Point

Mode.

Note Receiving point-to-point SiP calls may not work with all phones.

Figure 2-14. SIP Configuration Page Set to Point-to-Point Mode

Intercom is set to NOT register with a SiP server

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 87 88

Sem comentários

CyberData 011186 Especificações Página 37