
Installing the VoIP Intercom
Parts List
Operations Guide 930242G CyberData Corporation
30
Remote SIP Port* Enter the Remote SIP Port number (default 5060).
Local SIP Port* Enter the Local SIP Port number (default 5060).
SIP User ID* Enter the SIP User ID (up to 25 alphanumeric characters).
Authenticate ID* Enter the Authenticate ID (up to 25 alphanumeric
characters).
Authenticate Password* Enter the Authenticate Password (up to 25 alphanumeric
characters).
Register with a SIP Server* Check this box to enable SIP Registration.
For information about the Point-to-Point Configuration, see
Section 2.3.4.1, "Point-to-Point Configuration".
Re-registration Interval (in seconds)* Enter the SIP Registration lease time in seconds
(default 60 seconds).
Unregister on Reboot Check this box to disable the SIP registration after a
reboot.
Dial Out Settings
Dial Out Extension Enter the desired dial-out extension number.
Note: The Dial Out Extension also supports the addition of
comma delimited pauses before sending additional DTMF
tones (using rfc2833). The first comma will pause three
seconds after a call is first established with a remote
device. Subsequent commas will pause for two seconds. A
pause of one second will be sent after each numerical digit.
Examples of Dial-Out Extension strings:
302: Dial out extension 302 and establish a call.
302,2: Dial out extension 302 and establish a call. Wait
three seconds and then send the DTMF tone '2'.
302,25,,,4,,1: Dial out extension 302 and establish a call.
Wait 3 seconds and then send the DTMF tone '2'. Send out
DTMF tone 5. Wait six seconds. Send out DTMF tone 4.
Wait four seconds. Send out DTMF tone 1.
Note: The maximum number of total characters in the dial-
out field is 25.
Extension ID Type the desired ID name for the dial out extension.
Link to the Home page.
Link to the Device Configuration page.
Link to the Networking page.
Link to go to the SIP Configuration page.
Table 2-9. SIP Configuration Parameters (continued)
Web Page Item Description
Comentários a estes Manuais